TaoTronics TT-BH07 Guia Del Usuario página 6

2) The rst time you use the headset, press and hold the
Multifunction Button for approximately 5 seconds until the LED
indicator ashes red and blue alternately. Now the headset is
in pairing mode;
3) Activate Bluetooth ® function on your phone and search for the
nearby Bluetooth connection:
®
• For iPhone : Settings > Bluetooth
• For Android : Settings >Wireless & Networks > Bluetooth
On > Scan for devices;
• Find "TaoTronics TT-BH07" in the search results. Tap on the name
to connect. Once connected, only the blue LED will remain on.
Note:
• If a PIN code is required for pairing, please try "0000" or "8888"
(4 zero or 4 eight)
• The Bluetooth headset can remember previous paired
®
devices. If you have previously paired the headset with a
device, simply turn on your device and the headset (by
pressing the multifunction button for 1 second), they will
connect automatically with no need to go into pairing mode.
® > On;
:
®
3.How to Wear
Please wear the headset as shown in the diagram:
1. Attach the ear hooks onto the earphones;
2. Wear the earphones and the hooks on your ears and adjust for
the best t.
▲Note:
• Please note the "L" and "R" markings on the headset, they
correspond to left side and right side respectively;
• In addition to the headset, two pairs of different size ear buds
are included in the package. Please try them out and nd the
most comfortable t for you.
Trouble shooting
Q: My headset will not switch on.
A: Please recharge it and make sure it has enough power.
Plug the unit to a charger and see if the power button
becomes solid red.
Q: Why can't I pair this headset with other Bluetooth
A: Please check the following points:
• Make sure your Bluetooth device support A2DP pro le;
®
devices?
®
7/8