Velleman PROMIX8800 Manual De Instrucciones página 3

4. Source Switches
With these switches you can select between the signal sources on the rear panel.
5. Aux Mic / Line Selectors
This switch gives you the choice between 2 mono inputs, either a microphone or a jingle source coming from an
exterior sampler or recorder.
6. Microphone Input
The microphone input accepts a ¼" or XLR connector and also accepts balanced microphones.
7. Gain Control
Used for adjusting the level of the input signal.
Useful to harmonize the level of all the inputs.
8. Tone Control (High-Mid-Bass)
These 3 levels are used to adjust the frequency response of each channel. They correct the signal in a range of
± 12dB.
9. Panpot Control (Pan)
The main function is to mix left and right levels.
10. DJ Mic Level
Used for adjusting the level of the DJ output signal.
11. Talkover Control
When you talk into the microphone, the music level will drop automatically with the chosen decibel volume.
12. Monitor Switches (PFL)
With this switch you can select the output of the chosen channel. Works in combination with the PFL/Master switch.
13. Assign Switch
With these 2 switches you can choose between which 2 channels you would like to crossfade.
14. Punch Button
When the crossfader is on the right side, you can mix in the left assigned channel just by pushing on the left
Punch button (and vice versa).
15. Crossfader
With the horizontal slider you can move from one channel to an other (see 13). The sliders of the assigned
channels have to be open. At the center position, both channels will be heard.
16. Channel Level Controls
With these sliders you can control the volume of the 4 channels.
17. Beat Leds
Gives you a visual of the bass.
18. Output Master Level
To adjust the output level of the master output signal.
19. Balance
This control adjusts the master output of the left/right balance.
20. Booth Level
To adjust the level of the booth output signal.
21. Send Assign Switches
Selector switch for the send channels.
22. Send Control
This control adjusts the signal level, sent to an external device (effect).
23. Return Control
This control adjusts the signal, coming from a external device (effect), that will be added to the master output.
PROMIX8800
3
VELLEMAN