Back Panel - Velleman PROMIX8800 Manual De Instrucciones

24. Cue/Master Panpot
This fader is used to set up mixer and special effects in the left position, 'cue' is sent to the headphones. In full
right position, 'master' is sent to the headphones.
25. Phone Level Control
Used for adjusting the level of the stereo headphones.
26. Headphones Input Jack
Stereo input jack for headphones (Ø 6.35mm).
27. DJ Mic Loop
Allows you to connect an effect module in the mic channel.
28. Aux Line Jack Connector
These connectors correspond to the mono inputs controlled by the Aux channel cursor.
29. Mic Jack Connector
Mono connector for Mic input.
30. Ground
The ground is a terminal for grounding turntables to eliminate hum.
31. Input Connectors
2 phono and 6 CD/line.
32. Effect Send/Return Connectors
To connect effects, for example an echo chamber.
33. Rec. Output
Stereo output to connect a tape-recorder.
34. Master Output
Output level is controlled by the master fader.
35. Booth Output
The output level is controlled by the booth fader.
36. Fuse
Protects your mixer from different kinds of AC problems.
when the mixer is 'on' and doesn't respond, please verify
the fuse compartment, replace if necessary with a new one
of same size and values.
37. AC Cord
Before plugging this cord, make sure that the voltage
of the AC outlet is correct.
PROMIX8800

BACK PANEL

4
VELLEMAN