Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Before using your new Multimeter With Hold Function,
Before using your new Multimeter With Hold Function,
please read this instruction manual to prevent any damage.
please read this instruction manual to prevent any damage.
Put it away in a safe place for future references.
Put it away in a safe place for future references.
1.- INTRODUCTION
This meter is one of the most complete in the catalogue, it can
visualize 3 / 17 digits, it is portable and it can measures DC and
AC volts and amperes, ohmmeter, diode and transistor tester.
2.- CHARACTERISTICS
Accuracy of ± 0,5% in DC
Full range, automatic set to zero, polarity indicator, over range
and low battery indicator.
0,1μA resolution for small currents
Wide range on 20A current measures
Protection against over charge and audible indicator for incorrect
measures
3.- TECHNICAL SPECIFICATIONS
Input: 9V (one battery)
Accuracy: ±X % ± Number of digits
Temperature: 23°C ±5°C
Humidity: 80%
DC VOLTMETER
Range
200 mV
2V
20V
200V
1 000V
Input impedance: 10MΩ for small ranges
Overcharge protection: for peaks higher than 1 000V, except for
200mV range with a maximum value of 225V(~) rms.
AC VOLTMETER
Range
200 mV
2V
20V
200V
750V
Resolution
100μV
1mV
10mV
100mV
1V
Resolution
100μV
1mV
10mV
100mV
1V
ENGLISH-2
Accuracy
±0,5% ±1 digits
Accuracy
±1,2% ±3 digits
±0,8% ±3 digits
±1,2% ±3 digits
Publicidad
Tabla de contenido
