Maintenance & Repair - Pari PRONEB max Instrucciones De Uso

G. MAINTENANCE OF YOUR
The filter on the front of the PRONEB
was designed to be monitored without removing it. This
makes it easy to check without much work. When the
filter is new, it is bright white in color. With use, the
filter will turn grey, indicating the need for replacement.
The filter must be replaced immediately if it gets wet or
becomes clogged. A good rule to follow is to replace
your filter every 6 months - at the same time as your
PARI reusable nebulizer.
For filter replacement, obtain the replacement filter
set part #130F1002P2 which includes the filter and
filter cap (Fig E). Pull the old filter and cap out of the
compressor and discard (Fig F).
Once the old filter and cap are removed, tilt the
compressor so that the face of the unit is facing the
floor. Gently tap on the back of the compressor to
remove any unwanted materials from the filter area.
Place the compressor on a stable surface and using
clean hands, push a new filter with cap into the filter
receptacle.
NOTE: DO NOT ATTEMPT TO WASH AND
REUSE AIR FILTERS. DO NOT USE SUBSTITUTE
FILTER MATERIAL AS COMPRESSOR DAMAGE
MAY RESULT.
E
PRONEB
LC Sprint
®
LC PLUS
®
Wing Tip
PRONEB
®
PRONEB
Compressor
®
max
REPLACEMENT ITEMS
®
max
Reusable Nebulizer
Reusable Nebulizer
Tubing
®
Replacement Filter 2pk
max
Questions? 1.800.FAST.NEB (327.8632) | PARI.com/PRONEBMAX
MAX
®
COMPRESSOR
Use a damp cloth to wipe the exterior of your PRONEB
housing and tubing.
max
CAUTION
Never spray fluid into the ventilation slots on your
PRONEB . Fluid could cause damage to the electrical
®
max
& compressor parts and could lead to malfunction.
In the event fluid enters the unit, please contact PARI
Patient Connection at 1.800.FAST.NEB (327.8632).
MAINTENANCE & REPAIR
Never operate your PRONEB
incompletely assembled or damaged. Use only original
PARI parts and attachments authorized by PARI for the
PRONEB Aerosol Delivery System. Use of other
®
max
parts and attachments may damage the unit or cause
improper treatment. Do not open or disassemble the
compressor unit at any time.
NOTE: THERE ARE NO SERVICEABLE PARTS
INSIDE THE PRONEB MAX AEROSOL DELIVERY
®
SYSTEM. SERVICE BY ANYONE VOIDS
WARRANTY.
F
Part No.
023F35
022F81
044E0050
130F1002P2
if it is improperly or
®
max
EN-6
®