Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Open the clamps and remove the cable. Now pull away the
outer jack to expose the inner conductor.
•
Stripping distance is designed for 6mm.
4.- For stripping rounded network cable:
•
Put the cable into the cut slot, then press the stripper fi rmly.
•
Insert the cable into the second hole to cut the outer jack.
•
Rotate the stripper from 1 to 3 times, clockwise, then open
the jaws and remove the cable.
•
Remove the outer jack.
•
Remember, you can adjust the blade's depth. Turn right to
increase the depth of the cut; turn left to diminish the depth.
5.- For cutting fl at telephone cable:
•
For cutting fl at cable, insert it in the middle of the
double-blades, and squeeze the stripper.
•
If you use 4P/6P cable, make sure to place it until it touches
the stop guide.
•
If you use 8P cable, make sure to place it a little past the
lower cut blade.
ENGLISH-3
Publicidad
Tabla de contenido
