Master Trimmers MT Tumbler 200 Manual De Uso Y Mantenimiento página 18

Attach the input hopper (C) on the trimmer (A),
3
holding the hopper over the trimmer and fitting it into
the two positioners.
To open the arms, pull them up and turn them 90°.
5
Then fit the leaf collector bag (K) by sliding the
tapes over the leaf collector arms.
Push the buttons to start the barrel and the blade. Set the speed you want to use (if you have the adjustable
7
model).
18
ON (BLADES)
ON (TUMBLER)
OFF (TUMBLER)
Place the belt seal (E) on the leaf collector tube
4
between the trimmer (A) and the leaf collector (B).
Connect the leaf collector (B) and the trimmer (A)
6
to a power source (230 V/50 Hz single phase).
Read the checks that must be performed before
connecting.
OFF (BLADES)