harmonix WX1 Modo De Empleo página 6

WX1-Hex 10/06/05 17:38 Uhr
the point that OK will flicker in step
with the music and PEAK will flash
occasionally.
• If OK is lit constantly and PEAK flash-
es frequently or is lit constantly, the
transmitter input gain is too high. Turn
the inut gain control (3) down CCW to
the point that OK will flicker in step
with the music and PEAK will flash
occasionally.
7. Set the levels on your mixer or ampli-
fier referring to the appropriate in-
struction manual, or by ear.
4.2 Troubleshooting
For troubleshooting hints, refer to the
SR 40 HARMONIX receiver manual.
5 Cleaning
• To clean the transmitter case, use a
soft cloth moistened with water.
6
Seite 6
Carrier frequency
Modulation
Audio bandwidth
Frequency stability (-10°C to +50°C)
Rated deviation
T.H.D. at 1 kHz
Compander
Signal/noise ratio
RF output
Current consumption
Power requirement
Battery life
Size (WxDxH)
Net weight
This product conforms to the standards listed in the Declaration of Conformity. To
order a free copy of the Declaration of Conformity, visit http://www.akg.com or con-
tact sales@akg.com.
6 Specifications
710 to 865 MHz
FM
40 Hz to 20 kHz
±15 kHz
15 kHz (SP1, SP2: 13.5 kHz)
typ. 0.8%
integrated
typ. 103 dB(A)
typ. 5 mW
typ. 75 mA
single 1.5-V AAA size battery
>10 hours (dry battery)
>5 hours (rechargeable battery)
122 x 24 x 21 mm (4.8 x 0.9 x 0.8 in.)
24 g (0.8 oz.)
WX1