DeFelsko PosiTector 200 Manual De Instrucciones página 10

(below). The reported peaks will be indicated with small red
triangles on the graph.
Use the navigation
highlight icons on the graphic display.
Zoom - Visually magnifies the waveform of the displayed
peaks for more visibility. Pressing the
will decrease/increase the zoom.
Threshold (replaces 'Zoom'
enabled [below]) – Press the
threshold using a horizontal cursor. Peaks below the cursor will
be ignored.
Set Range - Press the
Gage's Lo or Hi measuring range. (pg. 5
Cursor - The Cursor allows for further analysis of displayed
waveform. Use the
left or right over the waveform. The thickness value is displayed at
the top right of the cursor. This feature is particularly useful in multi-
layer applications where there are more than 3 distinct layers.
Screen Capture - Press
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 12).
Shortcut:
Press and hold the
to capture any screen.
Menu - Press
Max Thick Mode
By default, the PosiTector 200 reports a coating thickness result
associated with the loudest ultrasonic echo (the highest peak in
Graphics Mode [pg. 8]), within the set range. This loudest echo
often represents the total coating thickness above the coating-
substrate interface. When multiple layers are selected (Advanced
(move left) and
or
or buttons to move the green cursor line
to capture and save an image of
and
to access the Gage's main menu.
9
(move right) buttons to
or button repeatedly
when Max Thick Mode is
buttons to adjust the
or buttons to adjust the
)
buttons simultaneously