Unit Overview; Temperature Sensor; Preparing The Unit - EDM Product 07581 Manual De Instrucciones

Ocultar thumbs Ver también para 07581:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

07580
07590
07581
REF.
REF.
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
- Only use the unit on a heat-resistance surface. Never position the unit close to hot surfaces or open ames.
- High temperatures are present during operation. Only touch the handles on the unit.
- The temperature regulator must not come into contact with the unit! Always pull out the plug before removing the
temperature regulator!
PACKAGING INFORMATION:
The unit is packaged to protect against transport damage.
The packaging materials are recyclable. Please dispose of the packaging materials via the appropriate recycling system in an
environmentally-friendly manner.

UNIT OVERVIEW:

1 Glass cover handle
2 Power connection base
3 Basic unit
4 Handles
5 Cooking surface
6 Glass cover

TEMPERATURE SENSOR:

1 Temperature sensor
2 Electric plug
3 Electric cable
4 Temperature regulator
5 Control lamp

PREPARING THE UNIT:

Start-up:
Note:
Before using the unit for the rst time, carefully clean the unit and cover.
Do not use any aggressive detergents, brushes with metal or nylon bristles or sharp
objects such as knives or spatulas for cleaning the unit. Avoid damaging the
non-stick coating. Always dry the unit thoroughly after cleaning it.
Connecting the unit:
1 Connect the temperature regulator to the base of the basic unit.
Make sure that the plug is connected properly.
2 Set the temperature selector switch to heat level "0".
3 Connect the plug to a 220-240V / 50 Hz fuse socket.
ATTENTION:
Do not use a multiple outlet strip or extension cable
Preparing foods:
1 Brush the pan with a little cooking oil.
2 Set the temperature regulator to the required heat level.
The control lamp will light up to signal that the unit is ready for use (ON).
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Publicidad

Tabla de contenido
loading

Tabla de contenido