Courtyard Creations RUS498G Instrucciones De Armado página 5

Step 9:
Slide the canopy/frame connectors (#24) onto
the side canopy braces (#10). In the pre-drilled
holes, secure them together by using screws
(#19). Make sure that the teeth on the
canopy/frame connectors are facing towards the
inside of the frame.
See Fig. E – Step 1 and Step 2.
Step 10:
Insert the front/rear canopy braces (#11) into the
sleeves on the canopy (#29).
See Fig. E – Step 3.
Step 11:
Insert the tube ends on the front and rear canopy
braces (#11) into the side canopy braces (#10).
See Fig. E – Step 4.
Step 12:
Velcro the canopy (#29) to the side canopy
braces(#10). See Fig. E – Step 5.
Step 13:
Fasten the canopy/frame connectors (#24) to
the adjustable teeth on the top cross beam w/
adjustable teeth (#1) by using a plastic screw
(#25). Repeat this procedure for both sides.
V-3
DO NOT RETURN TO THE STORE!
STOP
Step E - 1
10
Step E - 3
Step E - 4
10
29
10
Step E - 5
Fig. E
25
24
Fig. F
PAGE 5 OF 6
19
24
24
29
11
29
11
29
1
19
10
Step E - 2
11
11
10
10
24 25