Before Use - CPS Products Pro-Set TLTWSM Metric Instrucciones Para Su Uso

Fig. 1
Removable
Wrench
End
Socket
Arrow
Indicates
Tightening
Direction
Pivot Point
Wrench
Body
Torque
Values on
Vertical
Scale
Handle
Scale
Handle
Locking
Knob

BEFORE USE

•
•
Note: If wrench is not used for an extended
Wrench Size
time, turn handle to lowest torque setting
and Arrow
Must Be
on wrench body. Rotate handle in both
Same Side
directions while making a few "clicks". This
re-lubricates the wrench.
INSTRUCTIONS
1.
2.
3.
4.
5.
6.
Handle
Edge
7.
8.
To retain wrench accuracy, DO NOT
LOOSEN nuts, bolts, etc. USE ONLY
FOR TIGHTENING.
Apply a small amount of oil between
handle and wrench body.
Select Wrench from case.
Insert END into socket. Wrench size
and arrow must be same side.
Fig. 1
Loosen Locking Knob
counterclockwise to unlock
handle.
Determine Proper Torque
Setting For Equipment Being
Serviced (use setting specified by
equipment manufacturer).
Using Newton-Meter chart
, twist handle and align
Fig. 3
appropriate handle mark with
torque value on vertical scale.
For other settings, twist handle
to advance by 1 or more detents
to desired setting. (Each handle
detent = 1 Nm).
Tighten Locking Knob clockwise
to lock in your torque setting.
Tighten Equipment Fitting, Bolt,
Nut Until Clicks Are Felt/Heard
From Pivot Point Note: To prevent
tool damage, avoid further pressure
on wrench after torque (clicks)
achieved.
2