Kohler K-1106 Diagrama De Instalación página 2

16"
(40.6 cm)
1"
(2.5 cm)
7-3/4" (19.7 cm)
2-7/8"
(7.3 cm)
Product Information
Applicable product:
Bath whirlpool – drop-in style rim
Bath whirlpool – tile flange, left drain
Bath whirlpool – tile flange, right drain
Fixture*:
Basin area
Basin area, bottom 46" (116.8 cm) x 20" (50.8 cm)
Basin area, top 55" (139.7 cm) x 22" (55.9 cm)
Weight 49 lbs (22 kg)
To overflow
Water depth 12-1/2" (31.8 cm)
Capacity 49 gal (185 L)
* Approximate measurements for comparison only.
Pump:
1-speed
Recommended accessories:
Bath drain
Optional accessories:
Removable apron
1011087-1-D
60" (152.4 cm)
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1106
K-1106-L
K-1106-R
V Hz A
120 60 7.5
K-11677
K-1284
No change in measurements if connected
with drain illustrated. (K-11677 or K-11677M)
Pump/Control Access (if apron is not used)
20" (50.8 cm) W x 15" (38.1 cm) H Min
1-1/2"
32" (81.3 cm)
(3.8 cm)
18-1/8"
(46 cm)
1-1/2" OD
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (177 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
1-1/4"
(3.2 cm)
Tile Flange
Detail
120 V, 15 A, 60 Hz
Kohler Co.