Accessories; Fabric Brush - Silvercrest SDGS 1630 B1 Instrucciones De Uso E Indicaciones De Seguridad

Accessories

NOTE
►
►

Fabric brush

With clothing made from thick fabrics, such as cotton, the supplied fabric brush
works the steam deeper into the fibres.
1) Before you switch on the appliance, attach the fabric brush
head
part of the steam head
until it snaps onto the steam head
2) Switch the appliance on and slowly brush the section of the fabric from top to
bottom. Do not apply a lot of pressure (fig. R).
3) Switch the appliance off, remove the plug from the power socket and allow the
appliance to cool down completely.
4) Before you detach the fabric brush
power supply and allow it to cool down. Press the release latch on the fabric
brush
■ 14 │ GB │ IE
Before using any accessory, carefully read the manufacturer's care instruc-
tions on the label of the piece of clothing you are treating. We also
recommend that you test the accessory on a discreet part of the fabric first.
Before attaching an accessory to the steam head
cooled down completely and that the appliance is no longer connected to
the power supply.
1
. To do this, align the lower part of the fabric brush
p
and simultaneously pull it forward (fig. S).
Q
S
1
(fig. Q). Gently press the top of the fabric brush
1 . It will audibly click into place.
p
, disconnect the appliance from the
R
1
, ensure that it has
p
to the steam
p
with the lower
SDGS 1630 B1
p
p