Impecca HTDS-5175BT Manual De Usuario página 21

SYSTEM MENU OPTIONS
- Video -
Component:
Set the component video output in S-Vid-
eo or YUV mode.
Resolution:
Set video output resolution according to
the TV that is connected to this player. Please refer to your TV's
manual for resolution details.
Quality:
Sharpness: Set the sharpness of picture to high, medium or low.
Brightness: Set brightness of the picture. Highlight Brightness,
then press ENTER to set brightness from -20 to +20. Press ENTER
again to save and exit.
Contrast: Set the contrast of the picture. Highlight Contrast then
press ENTER to set contrast from- 16 to +16. Press ENTER again
to save and exit.
HDMI:
Audio Source: Set the audio source for HDMI to AUTO or PCM.
- Preference -
TV Type:
Used to select between PAL or NTSC
TV systems.
PAL: Select this if the connected
TV is a PAL system. It will change
the video signal of an NTSC
disc and output to PAL format.
NTSC: Select this if your TV is an
NTSC system.
Auto: Change the video signal output automatically according to
the playing disk format.
Audio: Selects a language for audio (if available).
Subtitle: Selects a language for the subtitles (if available).
Disc Menu: Selects a language for the disc menu (if available).
--VIDEO Setup Page --
Component
Resolu tion
Quality
HDMI Setup
--Preference Page--
TV Type
PAL
Audio
ENG
Subtitle
Off
Disc Menu
ENG
English
Parental
French
1 KID SAF
German
2 G
Password
3 PG Spanish
Itlian
4 Pg13
Default
Portuguese
5 PGR
6 R
Reset 7 N c17
8 ADULT
19
S-Video
YU V
48 0I
57 6I
720 P5 0
Sharpn ess
Brig htness 720 P6 0
108 0I50
C ontras t
108 0I60
Gam m a
Hu e 108 0p(50H z)
108 0p(60H z)
Saturation
PAL
AUTO
English NTSC
French
German
Spanish
English
Itlian
French
Portuguese
German
Spanish
Itlian
Portuguese
Off