Setting The Time - HoMedics PDM-100 Manual Del Usuario

SETTINg ThE TImE, DATE & USER
INFORmATION
Note: To start, please install the battery. For
more information, refer to the INSTALLING THE
BATTERY section of this manual.
The pedometer will turn ON and will show full LCD
segments for 2 seconds and then will automatically
display the STEP mode.
1. While in STEP mode, press and hold down the
SET button for 2 seconds. The 12 OR 24 hOUR
mODE should be blinking.
2. To select 12 or 24 hOUR mODE, press the RESET
button. Each press of the button will change the
selection in a cycling manner. Press the SET
button to confirm, and the screen will show a
blinking number representing the SECOND.
3. To set SECOND, press mODE button to set
seconds to 00, or press SET button to confirm,
and the screen will show a blinking number
representing the hOUR.
4. Use RESET and mODE buttons to set hOUR and
press the SET button to confirm.
5. Continue using the RESET and mODE buttons
to change the selection in a cycling manner, and
the SET button to confirm entry to finish setting
mINUTE, mONTh, DAY, and YEAR.
10
6. Press mODE button to select stride UNIT (IN or
Cm) and press SET button to confirm, and the
screen will show a blinking number representing
the STRIDE.
Note: By selecting IN, all information will be
displayed in Imperial format. By selecting Cm, all
information will be displayed in metric format.
7. Continue to use the RESET and mODE buttons to
select STRIDE, press SET button to confirm.
8. Continue using the RESET and mODE buttons
to change the selection in a cycling manner, and
the SET button to confirm entry to finish inputting
WEIghT and STEPS gOAL.
STEP MODE
...
MONTH
12/24 HOUR FORMAT
SECOND
MINUTE HOUR
11