Operating The Pedometer; Step Mode; Distance Mode; Calories Mode - HoMedics PDM-100 Manual Del Usuario

Notes:
• When setting, if after 10 seconds no data has
been entered, the display will automatically
switch back to the step mode.
• The reset button will increase numbers, the
mode button will decrease.
• Resetting any one of the following features
will result in clearing all of the following
features: STEPS TAKEN, DISTANCE
TRAVELED, CALORIES BURNED, or
EXERCISE TImE.
• If after 3 minutes no buttons are pressed and
no steps are counted, the display will enter
sleep mode.
• To reset ALL INFORMATION on the
pedometer, use a paperclip to press the
MASTER RESET button on the back of
the pedometer. After the button is pressed,
the display will show full LCD segments for
2 seconds and then automatically display
the STEP mODE. If the pedometer does
not automatically display this mode, press
the MODE button until the STEP mODE is
displayed.
12

OPERATINg ThE PEDOmETER

Press the MODE button to scroll through the
different modes of the pedometer.

STEP MODE

In this mode, a running total of the amount of
steps taken per day will be displayed and the time
in the 12 or 24 hour format (hh:mm:SS).
Note:
• Daily Target goal progress indicator.
STEP MODE
• This information automatically resets at midnight.
• Press and hold the RESET button to clear the data.

DISTANCE MODE

...
This mode will display how far you have walked
or ran each day and the time in the 12 or 24
hour format (hh:mm.SS).
Note:
MONTH
• This information automatically resets at midnight.
• Press and hold the RESET button to clear the data.
CALORIES BURNED MODE
This mode will display the time and the
amount of Calories burned.
MINUTE
13
12/24 H
S