Environmental Protection; Intended Use - Ryobi RLT4027 Traducción De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
changing accessories
checking for any damage after hitting an object
checking for any damage if the product starts to
vibrate abnormally
performing maintenance
Wear protective glasses or goggles.
Take care against injury from any device fitted for
trimming the filament line length.
Disconnect the machine from the mains before
checking, cleaning or working on the machine and
when it is not in use.
Always ensure that ventilation openings are kept clear
of debris.
MAINTENANCE
After use, disconnect the machine from the mains and
check for damage.
Use only genuine replacement parts and accessories.
After extending new cutter line, always return the
product to its normal operating position before switching
on.
After each use, clean with a soft dry cloth.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Any part that is damaged should be properly repaired
or replaced by an authorized service centre.
When not in use, the product should be stored in a cool
dry place and locked up out of the reach of children. Do
not store outdoors.
Inspection after dropping or other impacts
Thoroughly inspect the product and identify any affections
or damage with it. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.

INTENDED USE

This product is only intended for use outdoors. The product
is designed for cutting grass and light weeds only in private
garden areas.
Line trimmer
The product is intended for cutting long grass, pulpy weed,
similar vegetation at or about ground level.
Edger
The product is intended for cutting neat edges to grass
lawns.
The product should not be used to cut or trim hedges,
bushes or other vegetation where the cutting plane is not
parallel to the ground surface.
2

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOLS
Read the operation manual and follow all
warnings and safety instructions.
Wear ear protection.
Wear eye protection.
Do not expose to rain or damp conditions.
Danger of Ricochet. Keep all bystanders
at least 15 m away.
Remove plug from the mains
immediately before maintenance or if
cable is damaged or cut.
Keep bystanders a safe distance away
from the product.
Class II: Double insulation
Guaranteed sound power level
96
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.
CE Conformity
GOST-R Conformity
English

Publicidad

Tabla de contenido
loading

Tabla de contenido