Menu Mode - Apeman C550 Manual Del Usuario

Menu Mode

In the recording status, press the "Record/OK" button to suspend the
video, and then press the "Menu" key to enter the menu mode.
· By entering the menu mode to select different function parameters
and turn on and off various functions.
·
Features:
1.
G-sensor: Acceleration sensor. When the G-sensor detects the
emergency braking of the vehicle during driving, the video of this
period of time will be saved separately and will not be automatically
deleted.
2. WDR: Wide Dynamic Range. It can clearly display the extremely
bright part and extremely dark part at the same time.
3. Loop Recording: Automatically overwrite the unlocked video when
the TF card is full, to ensure the normal recording.
4. Parking Monitoring: Under parking mode, the dash cam is in the
power-off condition. The dash cam will automatically turn on and
record when detect a vibration.
5. Motion Detection: In the standby mode, the dash cam is in the
power-on condition. The dash cam will automatically start record-
ing when detect a motion in front of the car.
·
Resolution: This setting allows you to set one of three available video
recording resolutions, 1080FHD/720P/VGA. Higher resolutions will
give you a sharper image, but take up more memory on the card.
·
Display Mode: Picture in Picture /Front Camera /Rear Camera/Split-screen
·
Loop Recording: Off/1 Minutes/3 Minutes/5 Minutes
If you set this Off, Once the memory card is full, the camera will stop
recording. If you select 1 Minutes /3 Minutes/5 Minutes as the
duration of recording length for the individual video files, and the
9