Smart Switches - ASROCK X58 Extreme6 Manual De Instrucciones

The Installation Guide of Rear USB 3.0 Bracket The Installation Guide of Rear USB 3.0 Bracket The Installation Guide of Rear USB 3.0 Bracket The Installation Guide of Rear USB 3.0 Bracket The Installation Guide of Rear USB 3.0 Bracket
Step 1
Unscrew the two screws from the Front USB
3.0 Panel.
Step 3
Screw the two screws into the rear USB 3.0
bracket.

2.10 Smart Switches

2.10 Smart Switches 2.10 Smart Switches
2.10 Smart Switches 2.10 Smart Switches
The motherboard has three smart switches: power switch, reset switch and clear
CMOS switch, allowing users to quickly turn on/off or reset the sytem clear the
CMOS values.
Power Switch
(PWRBTN)
(see p.2 No. 22)
Reset Switch
(RSTBTN)
(see p.2 No. 20)
Clear CMOS Switch
(CLRCBTN)
(see p.3 No. 17)
You are not allowed to use Clear CMOS switch function if you set up the system
password. If you want to clear the CMOS values, please clean your system
password in advance or refer to page 30 "Clear CMOS jumper" description
instead.
ASRock X58 Extreme6 Motherboard
Step 2
Put the USB 3.0 cable and the rear USB 3.0
bracket together.
Step 4
Put the rear USB 3.0 bracket into the chassis.
Power Switch is a smart switch,
allowing users to quickly turn
on/off the system.
Reset Switch is a smart switch,
allowing users to quickly reset
the system.
Clear CMOS Switch is a smart
switch, allowing users to quickly
clear the CMOS values
3 7 3 7 3 7
3 7 3 7