Troubleshooting - Vissani MDCF5WH Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

NOTICE: The following simple issues can be handled by the user. Please call the after-sale service department if the issues are not settled.
Problem
Possible Cause & Solution
Whether the freezer is plugged and connected to power;
Low voltage;
Inoperation
Whether temperature control knob is in the work area;
Failure power or tripping circuit.
Odorous foods should closely wrapped;
Odor
Whether foods are rotten;
Whether the interior shall be cleaned.
It is normal that freezer operates for longer time in summer when the ambient temperature is higher;
Do not put too much food in the freezer at one time;
Long-term operation
Do not put foods until they are cooled;
of compressor
Frequent opening of freezer door;
Thick frost layer (defrost is needed).
Illuminating light
Whether the freezer is connected to power, whether the light is damaged.
does not shine
The freezer door is stuck by food packages;
The freezer door can
Too much food;
not be properly closed
Unbalanced freezer.
Whether the floor is flat, whether the placement of freezer is stable;
Loud noises
Whether the freezer accessories are properly placed.
Transient difficulty in
After refrigeration, there will be pressure difference between the inside and outside of the freezer to result in
door opening
transient difficulty in door opening. This is a normal physical phenomenon.
The freezer enclosure may emit heat during operation specially in summer, this is caused by the radiation of the
Freezer enclosure heat
condenser, and it is a normal phenomenon. Condensation: condensation phenomenon will be detected on the
Condensation
exterior surface and door seals of the freezer when the ambient humidity is large, this is a normal phenomenon,
and the condensation can be wiped away with a dry towel.
Refrigerants circulating in the refrigerant lines will produce eruption of sound and grunts which is normal does
Airflow sound
not affect the cooling effect.
Buzz
Buzz will be generated by running compressor specially when starting up or shutting down.
Clatter
The solenoid valve or electric switch valve will clatter which is a normal phenomenon and does not affect the
operation.
12

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mdcf7wh10056571801005657187

Tabla de contenido