Global Industrial 695436 Manual De Instrucciones página 3

WARNING
This warning alerts you to the possibilities of serious injury
or death if you do not follow the following instructions. It is
the installer's responsibility to make sure all components
are properly assembled and installed using the instructions
provided. Severe personal injury and property damage can
result from improper installation or assembly.
WARNING
Attachment holes may be damaged if a powered screwdriver
is used to insert button head cap screws. Screws should first
be inserted and turned by hand with hexagon key or with
screwdriver before using a powered screwdriver to complete
the attachment.
Read the following warning before installing:
• Verify all parts are included. Do not install if the products or hardware are damaged.
• This product contains moving parts. Assemble with caution.
• This product contains small items. Keep these items away from children.
• Do not exceed the maximum weight capacity for this product. Exceeding the weight capacity
can result in serious personal injury or damage to equipment. Maximum weight capacity is
9kg (19.8 lbs.) for the monitor bracket, and 50kg (110 lbs.) for the work surface platform.
CONTENTS
1
LCD Column
Qty. (1)
4
Keyboard Tray Slot Qty. (1)
7
VESA Bracket Qty. (1)
10
Round Head Hex Screw
M6 x 15mm Qty. (12)
14
Flat Head Hex Screw
M6 x 15mm Qty. (3)
18
Hex Allen Wrench 3mm Qty. (1)
Mobile Sit and Stand Workstation
2
Lift Pole
Qty. (1)
5
Work Surface Qty. (1)
8
Fixed Plate Qty. (1)
11
Washer Qty. (4)
15
Phillips Screw M4 x 12mm Qty. (4)
19
Hex Allen Wrench 4mm Qty. (1)
WARNING
It is the installer's responsibility to make sure the combined
weight of all components does not exceed weight capacity
of 50Kg (110 lbs). Exceeding weight capacities can result in
severe personal injury or damage to equipment.
WARNING
Do not load mobile workstation above maximum weight
capacities.
Do not mount a display above recommended monitor sizes.
Do not allow children to climb on top of mobile
workstation.
Do not move mobile computer cart on sloping surface.
12
Round Head Hex Screw
M5 x 10mm Qty. (2)
16
Phillips Screw M4 x 25mm Qty. (4)
20
Hex Allen Wrench 5mm Qty. (1)
2
Assembly Instructions
3
Base Qty. (1)
6
Mouse Holder Qty. (1)
9
CPU Holder and Screws Qty. (1)
13
Phillips Screw M6 x 12mm Qty. (4)
17
Oval Spacers Qty. (4)
21
Hex Allen Wrench 6mm Qty. (1)
22
Magnetic Screwdriver