How Do I Activate The Finder; Check Before Start - PAJ FINDER Manual Del Usuario


ISO 15765-4

1.4 How do I activate the FINDER?

In order to be able to use the PAJ GPS FINDER, it is necessary to
first activate the device online.
Note: To activate the device you need the ID of your FINDER.
These can be found on the barcode stuck on the device.
www.finder-portal.us/go

1.5 Check before start

Please observe the following points before connecting the
device to the vehicle battery:

SIM card sticks in the PAJ GPS FINDER

The PAJ GPS FINDER should not be attached to fuel lines or
other combustible components.

Do not attach the FINDER to any gasoline lines or other
inflammable components of the car.

Connecting the FINDER to the vehicle in order to charge the
FINDER for the first time may support discharging the
vehicle battery. Before connecting, check whether your
vehicle has a discharging protection and upgrade if
necessary. In idle mode, the FINDER requires approx. 10-20
mAh.
Please follow
for activation.
CAR OBD Finder 4G by PAJ GPS V.1.0 US
© PAJ GPS Inc.

J1939
6