MusicMan TWS Bluetooth BT-X39 Manual De Utilización página 14

In-Ear Headphones
Front
1 Microphone
2 Answer / End / Play/Pause
key
First use
Remove the plastic strip over the charging contacts of the In-Ear
headphones.
Put the headphones back in the charging box, close it and then
connect it: connect charging box with the MicroUSB cable and a
USB power adapter* (*not included in the delivery).
Only remove the charging cable when all 4 BLUE LEDs are
shining and the two RED LEDs turned off.
Remove the headphones from the charging box.
The BT-X39 must be switched off: press and hold the
answer/end buttons of both (!) headphones simultaneously for 7
seconds until the BLUE and RED LED flash alternately. Now the
headphones are paired and connected automatically. You hear the
announcement "connected, left channel, right channel, get into
paring mode".
device and select the „MusicMan BT-X39" from the list.
Now open the Bluetooth settings on your Bluetooth
Back
3 Speaker
4 Charging contact