Publicidad
Idiomas disponibles
Idiomas disponibles
The headphone must be powered off before you begin to initiate
the paring.
Press and hold the answer/end key for 3 seconds until the BLUE
and RED LED flash alternatively. The headphone is now in paring
mode.
Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. Check the user guide of your phone
for instructions.
Select the In-Ear piece „MusicMan BT-X39" from the list of found
devices. When you open the Bluetooth function on mobile phone,
you will find two MusicMan BT-X39 on the list of found devices. After
a while, it will be one only, then choose MusicMan BT-X39 and
connect it with Bluetooth mobile phone.
When asked the PIN code, please enter "0000" to pair the
headphone to your phone. In some phones you may need to make
the connection separately after pairing. See the user guide of your
phone for details.
If the pairing is successful, the headphone enters idle state and
BLUE LED will flash 1 time every 7 seconds. Connect the
headphone and mobile phone, and you will hear "pairing successful,
connected". The headphone's name appears in the phone menu
where you can view the currently paired Bluetooth devices.
If no Bluetooth connection is made within 5 minutes, the
headphone will turn off automatically.
Auto reconnection
When the two MusicMan BT-X39 are in off state, switch them on at
the same time or one after the other, they will reconnect
automatically. And the left (main) headphone will reconnect to the
paired mobile phone automatically too. The removal from the
charging box switches on the headphones automatically, too.
Publicidad
