Commercial Electric 55703141 Guía De Uso Y Cuidado página 2

2. Attach the S hook at the bottom of the mounting chain (AA)
to the hanger on the shop light (A). Repeat this step on the
other side of the fixture. Then close all hooks with pliers to
secure them.
3. Hang the shop light (A) by placing one chain (AA) over each hook
screw (CC) that has been installed on the ceiling.
4. Adjust chains to level light. The fixture must hang at least 3 in.
from the ceiling.
5. Plug the electrical plug adapter into an electrical outlet.
6. Pull the chain down to turn the light on and off.
CAUTION: When suspension mounting, make sure the light
fixture is located directly below the electrical outlet.
Excess cord should be secured to the mounting chain (AA)
with the cable tie (not included).
contInuous InstallatIon
Multiple light fixtures can be connected, up to a maximum of eight 42 in. shop lights or 400 total watts. Only the first light fixture
needs to be plugged into an electrical outlet.
1. Connect each additional fixture using electrical plug adapter. The maximum distance between two light fixtures is 1.22 m (4 ft.).
2. For best results, fully insert the electrical plug adapter into the receptacle in the end of the shop light.
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power to the shop light before linking additional shop lights. Do not
touch live parts inside the receptacle.
AA
Hanger
AA
2
A
CC
A
AA
Chain