Care And Cleaning; Troubleshooting - Commercial Electric 55703141 Guía De Uso Y Cuidado

connect to BluetootH wIreless tecHnology enaBleD DevIce
1. Plug the power cord for the Commercial Electric 42 in. Shop Light with Bluetooth speakers into an electrical outlet. When
plugged in, the speakers will emit a brief series of tones to indicate that the speakers have power.
2. Enable Bluetooth on your smart device.
3. Wait for the smart device to detect the shop light and then select it to pair the device to the speakers. When successfully
paired, the speakers will emit a brief series of tones to indicate that your device is connected.
4. Play music from your device while connected to the shop light to enjoy sound from the Bluetooth speakers.
5. Turn off music on your smart device, disconnect the shop light from Bluetooth on your smart device, or disable Bluetooth
functionality on your smart device when sound is not wanted from the shop light speakers.
NOTE: Bluetooth enabled smart devices typically have a range of approximately 33 ft. (10 m). Attempting to pair your
smart device to the Bluetooth speakers beyond the intended range can result in poor audio quality, drop-outs, or failure to
connect.
NOTE: Only one device at a time can be connected to the Bluetooth speakers.

care anD cleanIng

CAUTION: Before attempting to clean the tube and luminaire/light fixture, disconnect the power to the fixture by turning
the breaker off or removing the fuse from the fuse box. Clean with a soft, dry cloth. Do not use cleaners with chemicals,
solvents, or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring.

trouBlesHootIng

Minor problems often can be fixed without the help of an electrician.
WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Problem
The fixture will not light.
The fuse blows or the
circuit breaker
trips when the light is
turned on.
The Bluetooth speakers
will not pair with a smart
device.
Possible cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the
power
wire is grounding out.
The Bluetooth feature is
turned off on the smart
device.
The smart device is out
of range of the Bluetooth
speakers.
The smart device is not
discoverable.
The smart device did not
automatically connect to the
Bluetooth speakers.
The shop light is not
powered on.
Interference is causing
confusion with the
connection.
solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made. Contact a
qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call Commercial Electric customer
service 1-877-527-0313.
Ensure the Bluetooth function is turned on within the device
settings. A Bluetooth symbol should be visible somewhere on the
device screen.
Charge up the device being paired with the shop light. Smart
power management may have turned off the Bluetooth function
when low on power.
Be sure the shop light is within 33 ft. (10 m) of the smart device.
Turn on "Discoverable" mode on the device to allow the shop light
and smart device to recognize each other.
Confirm the device's "Discoverable" mode is turned on to allow the
shop light and smart device to recognize each other.
Go to the pairing list on the device and manually connect the
device to the shop light.
Make sure the shop light is plugged into a working electrical outlet.
Ensure the circuit breaker is in the on position.
Power both the device and the shop light off and back on.
Power off other devices the shop light has previously been
connected to.
Delete the shop light from the smart device and rediscover it.
Move away from Wi-Fi routers or computers that could be causing
interference.