Before First Use; Using The Appliance - Philips HR1720/50 Manual De Instrucciones

Never forget to place the sealing ring on the blade unit before assembling the blender jar,
,
otherwise leakage will occur.
Always make sure the lid is properly closed and the measuring cup has been inserted
,
properly before you switch the appliance on.

Before first use

Thoroughly clean the parts which will come in contact with food before you use the appliance for
the first time (see chapter 'Cleaning').

using the appliance

Measuring cup (G)
You can use the measuring cup to measure ingredients or to prepare mayonnaise.
Note:To prepare mayonnaise: The oil should be added very slowly to obtain the right consistency. Run the
blender at a low speed when preparing mayonnaise.
Blender
The blender is used for fine pureeing, chopping and blending. With the blender you can prepare
soups, sauces and milk shakes, and process vegetables, fruit, meat, batter etc.
Preparing the blender for use
1 Assemble the sealing ring (E) on the blade unit (D). (Fig. )
 Screw the blade unit anticlockwise onto the bottom of the blender jar (C) until the blade
unit is fixed properly . (Fig. 3)
 Mount the blender jar, with the blade unit attached onto the motor unit (A) and fix it by
turning it clockwise ('click'). (Fig. )
The blender jar can be mounted in two positions (Fig. 5)
,
 Make sure that the appliance is plugged in.
How to use the blender
1 Put the ingredients in the blender jar.
 Place the lid on the blender jar.
 Close the lid by pushing it down and turning the lid clockwise ('click'). (Fig. 6)
 Insert the measuring cup into the opening in the lid.
5 Turn the control knob to speed 1 or .
Turn the control knob to 'pulse' position if you want to process ingredients very briefly.
6 Do not let the appliance run for more than  minutes at a time.
If you have not finished processing after 3 minutes, switch the appliance off for one minute before
you let it run again.
If you want to add ingredients while the appliance is running, remove the measuring cup and add
the ingredients through the opening in the lid.
7 If you are not satisfied with the result:
- switch the appliance off and turn the control knob to pulse position a few times to let the
blender run briefly, or
- switch the appliance off and stir the ingredients with a spatula, or
- switch the appliance off and pour out some of the contents of the jar and process a smaller
amount, or add more liquid and continue processing.
EnglisH
7