Intended Use; Safety Informations - BGS technic 8766 Manual De Instrucciones

Tire Valve Inserting Tool Set | 4 pcs.
COMPONENTS
1 Mounting cone
2 Mounting shaft
3 Valve extractor with T-handle
4
Replacemant valve
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This product allows economic renewing of rubber tire valve without dismantling the tire from rim.

SAFETY INFORMATIONS

Keep children and other unauthorized persons away from the work area.
•
Do not let children play with the product or its packaging
•
• Use the product only for its intended purpose.
This tool is not suitable for metal tire valves.
•
• After installation, check the valve for correct seating and leakage.
REMOVING
Let the air out of the tire if you haven't already.
Place the hook of the valve extractor (3)
between the rim and the rubber body of the tire
valve and press the hook into the rim.
Turn the T-handle 90° and pull it towards you,
the hook must engage in the tire valve from
below.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8766
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed