Intended Use; Maintenance & Cleaning - BGS technic 985 Manual De Instrucciones

SPECIFICATIONS
Maximum load: 1500 kg (about 15000 N)
Minimum distance: 96 mm
Maximum distance: 220 mm
Maximum travel: 124 mm
Dimensions body: Ø29 x 225-280 mm
Dimensions torque stick: Ø27 x 180 mm
Weight body: 0.64 kg
Weight torque stick: 0.26 kg
Max tension force: 40 Nm
Spring type: Coil spring 90-120 mm
Coil spring 120-140 mm
INCLUDED
1 Torque stick (Safety key), 40 Nm
2 Jaws, Ø 90 - 120 mm (2 pieces)
3 Jaws, Ø120 - 140 mm ( 2 pieces)
4 Compressor

INTENDED USE

The coil spring compressor is exclusively for coil springs compressing Wishbone and Multilink
Systems. This product is not for conical spring and ball spring. Any other or further use is considered
as not intended and is forbidden!
MAINTENANCE & CLEANING
Maintenance personal should be qualified and trained in the compressor functions and failure modes,
their rectification, operation and maintenance of the product. Regular check period 1 month. When
you find any damage or deformation, please stop use immediately and ask manufacturer for help.
Never try to repair the product yourself. Store the unit in a dry place without corrosion. Package the
jaws with compressor as it delivered. Always keep the unit clean. Especially ensure dry and make
sure no water in spring compressor.
Grease the guide spindle if necessary, however at least every six months. Clean the spindle before
greasing. Recommended grease: graphite grease.
User shall not try to repair or disassembly the spring compressor.
When you have such need, please connect manufacturer for help.
For all inquiries please include the serial number in all cases.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Spring Compressor
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 985
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed