Preparing For Use; Transport And Storage; Mounting Information - sigel. Sound Balance Indicación De Montage E Indicación De Uso

4

Preparing for use

4.1

Transport and storage

Please note the following points regarding the transportation of the acoustic edge:
Check the packaging for damage if you have ordered it through a transportation services provi-
ƒ
der.
Report any damage during shipment to the transportation services provider and to the retailer
from whom you purchased the acoustic edge.
During transport and when storing the product, do not knock, drop or otherwise apply force to
ƒ
it. This can damage the acoustic edge.
During transport, do not expose the acoustic edge to moisture or extreme temperatures, e.g.
ƒ
frost or heat.
Please note the following when storing the acoustic edge:
Store the acoustic edge in its original packaging for as long as possible.
ƒ
If you no longer have the original packaging, keep the acoustic edge covered during storage.
Store the acoustic edge in a dry, enclosed space to protect it from moisture, direct sunlight,
ƒ
dust and dirt.
4.2

Mounting information

Please note the following when mounting the acoustic edge:
We recommend that the product is mounted by a qualified person, such as your company's
ƒ
facility manager.
Affix the acoustic edge onto the wall with the correct type of anchors and screws.
ƒ
The enclosed anchors and screws are suitable for solid, even walls.
ƒ
Use special anchors and screws for all other wall types.
The acoustic edge cannot be mounted on the ceiling.
ƒ
When mounting, please allow for a gap of at least 1.5 cm to the left and 3.5 cm from the top
ƒ
between the outer edge of the acoustic edge and other objects, e.g. the ceiling.
The acoustic edge can be mounted either horizontally or vertically.
ƒ
For horizontal mounting, insert the acoustic edge into the mounting rail from top left to bottom
ƒ
right.
15
Fig. 3 Horizontal mounting of the acoustic edge, measurements in mm
For vertical mounting, e.g. in the corner of a room, insert the acoustic edge into the mounting
ƒ
rail from top right to bottom left.
When mounting the product vertically, always ensure that the openings of the mounting rail are
ƒ
facing upwards and that the acoustic edge has a secure hold when inserted.
Sound Balance acoustic edge
35
17