Assembly - Attaching the Light Kit (continued)
2
Installing the glass bowl
CAUTION: Make sure the power is off before attaching
or removing the glass bowl.
WARNING: Allow the glass bowl to cool completely
before removing.
□
Remove the glass bowl holder (MM) from the threaded nipple
of the light kit fitter assembly (F).
□
With the power off, install the three LED bulbs (J) by screwing
them into the light bulb sockets.
□
Position the glass bowl (G) over the threaded nipple.
□
Install glass bowl holder (MM) to the threaded nipple to secure
the glass bowl (G) properly.
Assembly - Attaching the Wall Bracket (Optional)
Mounting the remote control holder
NOTE: Screw wall anchors (FF) are included for extra support.
The included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors (FF) prior to attaching the wall cradle (M) to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle (M).
□
Position the wall cradle (M) in the desired position and attach
it to the wall using the included wall mount screws (EE).
□
Slide the screw cover plate back onto the wall cradle (M) to
conceal the screws.
Screw cover plate
M
EE
13
Please contact 1-855-HD-HAMPTON for further assistance.
E
F
G
MM
J
HAMPTONBAY.COM