7. Shaft
8. Support cup
9. Transport guard
10. Combination wrench
11. Information and warning decal
12. Operator's manual
Symbols on the attachment and on the
power unit
Careless or incorrect use of this attachment
can result in serious or fatal injury to the
operator or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use the attachment.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Maximum cuts per minute.
California Proposition 65
1050 - 002 - 12.04.2019
WARNING
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects
or other reproductive harm.
The arrows show the limits for the position of
the handle.
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m / 50 ft distance to
persons and animals during operation of the
product.
yyyywwxxxx
The serial label shows serial number.
yyyy is the production year and ww is
the production week.
Note: Other symbols/decals on the attachment refer to
special certification requirements for certain markets.
The operator must ensure
that no people or animals
come closer than 15 me-
tres. When several opera-
tors are working at the
same site a safety dis-
tance of at least 15 metres
must be in effect. The at-
tachment can forcibly
throw objects that can
bounce back. This can re-
sult in serious eye injuries
if the recommended safety
equipment is not used.
3