Intended Use; Improper Use - EDM Product 08790 Manual De Instrucciones

· Before taking the device into operation, have the following
checked by an expert:
- earthing, neutral conductor and RCD must be functioning
properly and correspond to the national regulations,
- electrical plug connections must be protected from mois-
ture.
· Provide appropriate frost protection.

INTENDED USE

The device is only suited for draining, conveying and pumping over
the following media:
▶ clear water
▶ non-corrosive suds (e.g. leaking washing machine)
When doing so, the water must not contain any suspended
matter exceeding a maximum particle size of 5mm.The device is
fully submersible (watertight encapsulation) and can be immersed
up to 7m into the conveyed medium.
The water temperature must not exceed 35°C.
The device may temporarily be used for e.g.:
▶ pumping out flooded basements
▶ emptying tanks and containers
▶ the water withdrawal from wells and shafts

IMPROPER USE

· The device is not suitable for continuous operation (e.g. as recircu-
lation pump for ponds).
· Using the device in swimming pools and the like is prohibited.
· The device is not suitable as permanent, automatic overflow
protection of e.g. wells or fountains or for the regulation of the
groundwater level. Use a stationary waste water pumping system
for building and property drainage for these purposes.
· The device is not suitable for increasing the pressure of existing
water supply networks.
· The device is not suitable for pumping potable water.
· The device must not be used for aggressive, abrasive, caustic, com-
bustible or explosive pumping media, e.g.:
- brine
- sandy water
- food
- cleaning agents
- fuels (e.g. petrol, diesel)
- oils
Instruction manual Ref. 08790 / Ref. 08791
ES
PT
EN
FR