Overheating Protection; Information About The Device - EDM Product 08790 Manual De Instrucciones

Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and
storage of the device.
BEHAVIOUR IN THE EVENT OF AN EMERGEN
1- In an emergency, disconnect the device from the mains feed-in:
Switch the device off and disconnect the power cable from the
mains socket. Hold onto the mains plug while doing so.
2- Do not reconnect a defective device to the mains.

OVERHEATING PROTECTION

The device is provided with a thermal protection circuit which is
activated by overheating of the device and then switches the device
off. Allow the device to cool down and switch it off. Investigate the
cause of overheating. Should the problem persist, please contact
the customer service.

INFORMATION ABOUT THE DEVICE

Device description
The submerged water pump is only suited for draining, conveying
and pumping over clear water with the contained suspended
matter not exceeding a maximum particle size of 5mm.
A float ensures the automatic switch-on and switch-off at a respecti-
vely defined height.
Additionally, the switch-on/-off height can be finely adjusted within
the specified range by means of a locking device, see technical data.
The water temperature must not exceed 35°C.
Instruction manual Ref. 08790 / Ref. 08791
ES
PT
EN
FR