Electromagnetic Fields (Emf); Before First Use - Philips GC8215/01 Manual De Instrucciones

- Children should be supervised to ensure that they do not play with the
appliance.
- Do not let the mains cord and supply hose come into contact with the
hot soleplate of the iron.
- If steam escapes from under the Calc-Clean rinsing cap when the
appliance heats up, switch off the appliance and tighten the Calc-Clean
rinsing cap. If steam continues to escape when the appliance heats up,
switch off the appliance and contact a service centre authorised by
Philips.
- Never remove the Calc-Clean rinsing cap when the steam generator
is hot.
- Do not use any other cap on the steam generator than the Calc-Clean
rinsing cap that has been supplied with the appliance, as this cap also
functions as a safety valve.
Caution
- Only connect the appliance to an earthed wall socket.
- Check the mains cord and the supply hose regularly for possible
damage.
- Always place and use the iron and the steam generator on a stable,
level and horizontal surface.
- The soleplate of the iron can become extremely hot and may cause
burns if touched.
- When you have finished ironing, when you clean the appliance, when
you fill or empty the water tank and also when you leave the appliance
even for a short while: put the iron on the iron stand, switch off the
appliance and remove the mains plug from the wall socket.
- Rinse the steam generator regularly according to the instructions in the
chapter 'Cleaning and maintenance'.
- This appliance is intended for household use only.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Before first use

Note: The iron may give off some smoke when you use it for the first time. This
is normal and stops after a short while.
Note: Some particles may come out of the soleplate when you use the iron for
the first time. This is normal; the particles are harmless and stop coming out of
the iron after a short while.
Note: When you switch on the appliance, the steam generator may produce a
pumping sound. This is normal; the sound tells you that water is pumped into
the steam generator.
1 Remove any sticker or protective foil from the soleplate and clean
the soleplate with a soft cloth.
EnGlish
7