Acer G773 Guia Del Usuario página 8

FCC Class B
Radio Frequency Interference State-
ment
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasona-
ble protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio fre-
quency energy and, if not installed and used
in accordance with the instructions, may
cause harmful interference to radio commu-
nications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turn-
ing the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving
antenna.
2. In crease the separation between the
equipment and receiver.
3. Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced
radio/television technician for help.
Notice:
The changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user's authority to
operate the equipment.
Caution:
1. If you find some parts of the monitor
display discolored due to magnetic
fields generated by electrical facilities or
appliances, turn off the monitor for at
least 15 minutes. The degaussing circuit
of the monitor will eliminate the
discoloration.
2. Do not remove the monitor from its
swivel base while the power is on to
prevent discoloration. If discoloration
occurs, follow the above-mentioned
procedure for adjustment.
3. Shielded power cord and interface
cable, if any, must be used in order to
comply with the emission limits of FCC
Class B digital device.
FCC Class B 7