Product Maintenance - Fellowes 5850C Manual De Instrucciones

ADVANCED PRODUCT FEATURES
Sheet Capacity Sensor
Helps prevent paper jams by
indicating sheet capacity levels
during the shredding process
SHEET CAPACITY SENSOR
Helps prevent paper jams by indicating sheet capacity levels during
the shredding process
Electronically measures paper thickness to prevent
paper jams:

PRODUCT MAINTENANCE

CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However,
on rare occasions the sensors may become blocked by paper dust causing the
motor to run even if there is no paper present
located in the center of the paper entry).
TO CLEAN THE SENSORS
1
2
Turn off and unplug Locate Auto-start
shredder
infrared sensor
OILING SET-UP
1 2
Remove oil bottle Hook oil bottle
holder from cabinet holder into side
of cabinet
TROUBLESHOOTING
Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 3604101.
Safety Shield Indicator: When flashing alternatively with On/Off ( ) LED, safety shield is open and shredding will stop. To resume shredding, make sure safety shield is closed.
Door Open Indicator: When flashing alternatively with On/Off ( ) LED, the door is open. To resume shredding, make sure the door is closed.
Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. If necessary, press (R) to run shredder in
reverse. See Paper Jam section.
Low Oil Indicator: When illuminated, the shredder oil is low and will need to be replaced. Use Fellowes Oil for Automatic Oiling Systems 3505801.
Safety Shield
Electronically controlled shield
stops shredder when opened
for advanced safety
Up to RED: Too many sheets have been
inserted. Automatic reverse of paper.
Up to YELLOW: Maximum sheet capacity.
Up to GREEN: Normal sheet capacity
during shredding process.
(Note: two paper detection sensors are
3 4
Use thin, long-handled brush Clean any contamination
to clean sensors. Make sure
from the paper sensors
brush is clean and dry
3 4
Put oil tube into oil
Remove lid from
bottle and screw
oil bottle
stopper on
Auto Shut Off
SilentShred™ Technology
After 30 minutes of inactivity,
SilentShred™ noise quality
shredder automatically turns off
shreds without noisy disruptions
for zero energy consumption
1
To activate shredder or
press ON ( )
PAPER JAM
Set to Off ( ) and empty bin. Replace bin and follow the below procedures.
1
Stops automatically
if too much paper
is inserted. Automatic
reverse if paper jams
5 6
Place oil bottle into Close door. Plug
oil holder on side into socket-outlet
of cabinet
Auto Oil
Lubricates the cutters automatically
to enhance performance and
extend shredder life
AUTO SHUT OFF
After 30 minutes of inactivity, shredder automatically turns off for
zero energy consumption
2
insert paper
3
2
Gently pull uncut paper Shred one sheet
from paper entry. Machine
runs for a short time in
reverse. Repeat if necessary
7 8
Oil pump starts
After changing oil
automatically on
bottle, press Reverse
first use. To stop Oil
(R) until Oil Indicator
Indicator ( ) from
( ) no longer blinks
blinking red, press ON
red
( ) after 15 seconds
3