Changing The Fuse; Technical Data - Testboy TB 313 Instrucciones De Empleo

Ocultar thumbs Ver también para TB 313:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39

Technical data

Only use the specified batteries!
Do not dispose of batteries in normal household rubbish! Observe statutory regula-
tions pertaining to disposal!

Changing the fuse

When changing the fuse, remove the measurement leads from the device and remove the screws
on the rear of the device (two at the bottom, one at the top). Carefully remove the rear of the
housing and replace the fuse with fuse of the same type (Fuse F 10 A / 1000 V). Replace screws
and screw tight.
The F200 mA fuse is self-resetting and therefore maintenance free.
Only use the specified fuse!
Technical data
The accuracy relates to 1 year used in temperatures between 18 °C – 28 °C and 75% relative
humidity. Further calibration is also offered.
Max. voltage between the connection socket and ground:
600 V AC / DC
Fuses
Max. operating height:
Height of display:
Display
Polarity indicator
Overrange indicator:
Sampling rate
Low battery status:
Power supply
Operating temperature
Storage temperature
Dimensions
Weight
Category
26
F 200 mA self-resetting (maintenance free)
F 10 A 1000 V quick-blow
2000 m above MSL
37 mm LCD
Max. 1999 (3½ )
Automatic
"1" is displayed
Approx. 0.4 sec.
Battery symbol is displayed
1 × 9 V block battery
0 °C to 40 °C
-10 °C to 50 °C
191 × 82 × 37 mm (without holster)
200 × 89 × 38 mm (with holster)
280 g incl. battery
CAT III 600 V
®
Testboy
TB 313

Publicidad

Tabla de contenido
loading

Tabla de contenido