Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3
MA-TK8020_AA_II_DE68-04476A-01_EN.indd 5
4. Tight 2 screws together on the
Install hook by using provided
SCREW A. (2 EA)
NOTE
You may not be assembled when using
the thicker Drill bit.
5. Remove 4 screws from the lower
right and left side of outer panel.
STEP 4
Duct Base
1. Place oven on the Duct Base.
2. Tight 2 screws together on the
back side with Duct base by using
provided SCREW C. (2 EA)
3. Tight 2 screws together on the
right side with Duct base by using
provided SCREW C. (2 EA)
English 5
2017-06-01
6:16:04
Publicidad
