Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Duct Side
Torx screw
Duct Rear
Torx screw
6 English
MA-TK8020_AA_II_DE68-04476A-01_EN.indd 6
4. Tight 4 screws to Duct base and
Duct side on the left side by using
provided SCREW C. (4 EA)
5. Remove 2 Screw C on top of the
back. In addition, Remove 1 Torx
Screw to use Torx driver on bottom
of the back. Do not scrap Screw.
(3 EA)
6. Tight a Torx Screw and 3 Screw C
on top of the back.
STEP 5
Check the assembly
between Install hook
and Duct base.
Install
Bracket
1. Slide the oven with Duct Base into
cabinet until Duct Base touch the
front of cabinet.
2. Plug the Power cord into the
electrical outlet.
3. Tight 2 screws to Duct base and
Cabinet by using provided SCREW
A. (2 EA)
NOTE
Be aware when you put a oven into the
cabinet because cabinet may be moved.
Align the Center with cabinet
4. After placing the Install Bracket to
match with holes, tight together by
using provided SCREW A. (4 EA)
2017-06-01
6:16:04
Publicidad
