Steren CCTV-905 Manual Del Usuario página 11

c) Auto Sequence.
This option allows you to setup the sequence in which the screen will
change between displaying the mosaic, camera 1, camera 2, camera 3,
and camera 4.
The times available are between 1 and 99 seconds or skip.
In order to select mosaic or the desired camera use the up/down arrow
keys and use the right/left arrow keys in order to increase or decrease
the number of seconds.
In order to select the auto sequence option, press the AUTO button on
your remote control
d) Camera Setup.
This option allows you to name the cameras as well as adjust the
brightness, contrast, color, and hue of each camera selected.
In order to select this option use the up/down arrow keys and use the
right/left arrow keys in order to change the values. Use the ENTER key
in order to save the changes.
e) Monitor Setup.
This option allows you to setup your monitor. You can program the
monitor to power on/off t a certain time. Also the sensitivity and speed
can be configured. In order to select this option use the up/down arrow
keys and use the right/left arrow keys in order to change the values.
Use the ENTER key in order to save the changes
ENGLISH-13