Leviton Intellect ZLS0R-RA1 Instrucciones De Instalación

Intellect
®
DESCRIPTION
ZLS0R-RA1 is an optional remote control programmer for use with
ZLS05-ILW. Use the remote to configure occupancy sensor and daylight
harvesting control parameters.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165
Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper
use for five years from the purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty
excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a
particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
© 2020 Leviton Mfg. Co., Inc.
Optional Remote Control for Solo Sensor™
INSTALLATION INSTRUCTIONS
Press the Motion ON button to enable the occupancy sensor.
Press the Motion OFF button to disable the occupancy sensor. The
luminance is unaffected whether or not occupancy is detected.
Press the RESET button for all parameters to be restored to DIP
switch settings.
Press the REPEAT button to copy the parameters set by the remote control
the last time it was in use. Press again to repeat the copied parameters to
another fixture.
Press the ON button to enable daylight harvesting.
Press the OFF button to disable daylight harvesting. The light is not
affected by ambient brightness if daylight harvesting is disabled.
Task Light Level allows the user to set the indoor ambient brightness
value. The light output regulates automatically according to the level of
natural light available.
Occupied Timeout represents the time that the sensor will turn off if light
level is 0% or dim the light to a low level after the area is vacated.
Light Level is used to set the output level of connected lighting during
vacancy. The sensor will regulate the lighting output at the set level.
Setting the level to 0% means the light is fully off during vacancy.
Prolonged Timeout Light Level represents the time that the sensor will
keep the light at low dim level after the Occupied Timeout elapsed.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
Cat. No. ZLS0R-RA1
DI-000-ZLS0R-25A
ENGLISH