Maintenance And Cleaning - Würth BMH 45-XE Manual Del Usuario

Action
Switching On/Off in Drilling Mode
Switching On/Off in Chiselling Mode
Adjusting the Speed
Observing the service indicator

Maintenance and Cleaning

For safe and proper working, always keep the
machine and ventilation slots clean.
When replacing the power tool's cable is required, have this
carried out by a Würth master-Service or by an authorised
customer services agent for Würth power tools, in order to
avoid hazardous situations.
In all correspondence and spare parts orders, please always
include the article number given on the type plate of the
machine.
The current spare parts list for this power tool can be viewed
in the Internet under
"http://www.wuerth.com/partsmanager"
or be requested from your next Würth branch office.
Service Indicator (see Fig. 9, page 179)
When the carbon brushes are worn out, the machine switches
itself off. This is indicated approx. 8 hours beforehand by the
lighting or blinking of the service indicator . The machine must
then be sent to an after-sales service agent.
Service indicator flashes in regular intervals, the machine is
defective. In this case, do not continue to use the machine and
send it immediately to an after-sales service agent.
Figure Please observe
6
7
8
9
Guarantee
For this Würth power tool, we provide a guarantee in accord-
ance with the legal/country-specific regulations from the date
of purchase (verified by invoice or delivery document). Dam-
age that has occurred will be corrected by replacement or
repair.
Damage caused by normal wear, overloading or improper
handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent undisas-
sembled to a Würth branch office, your Würth sales repre-
sentative or a customer service agent for Würth power tools.
Disposal
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and Elec-
tronic Equipment and its implementation into
national right, power tools that are no longer
usable must be collected separately and dis-
posed of in an environmentally correct man-
ner.
Subject to change without notice.
Page
178
178
178
179
15