General Guidelines - TECshow ORBIT HEX Manual De Usuario

General Guidelines

• This device is a lighting effect for professional use on
stages, in discotheques, theaters, etc., the device was
designed for indoor use only.
• This fixture is only allowed to be operated with the max
alternating current which stated in the technical specifi-
cations in the last page of this manual.
• The device can work continuously for eight hours. Light-
ing effects are not designed for permanent operation.
Consistent operation breaks may ensure that the device
will serve you for a long time without defects.
• Handle with care, do not make the device by strong shocks.
• While choosing the installation-spot, please make sure
that the device is not exposed to extreme heat, moisture
or dust. Please don't project the beam onto combustible
substances.The minimum distance between light-output
from the projector and the illuminated surface must be
more than 1 meter.
• Please do not in damp, overheat or dusty environment
install and use the device. Do not use light on fuel. The
distance between the device and the projectile to keep
at least 1 meter.
• If you use the quick lock cam in hanging up the fixture,
please make sure the quick lock fasteners turned in the
quick lock holes correctly,and add safety rope.
• Operate the device only after having familiarized with its
functions. Do not permit operation by persons not qual-
ified for operating the device. Most damages are the re-
sult of unprofessional operation.
• Please use the original packaging if the device is to be
transported.
• For safety reasons, please be aware that all modifica-
tions on the device are forbidden.
• Any installation and maintenance must by professional
person.
• If this device will be operated in any way different to the
one described in this manual, the product may suffer
damages and the guarantee becomes void. Further-
more, any other operation may lead to short-circuit,
burns, electric shock, lamp explosion, crash, etc.
ORBIT HEX
ENGLISH VERSION
p. 4