TECshow ORBIT HEX Manual De Usuario página 9

DMX-512 connection with
DMX terminator
If there are many lines or lights, it is recommended to use a
DMX terminator to prevent DMX signal corruption, the DMX
terminator is an simple XLR plug with a 120 Ω resistor con-
nected between pins 2 and 3,which is then plugged into the
output XLR socket of the last fixture in the chain.
ORBIT HEX
ENGLISH VERSION
Welding a 120 ohm resistor be-
tween 2 and 3 pins male XLR , and
insert it into the signal output of
the last device
p. 9