Uline H-5947 Manual Del Usuario página 2

1. Insert two 47mm bolts through the holes in the left
leg. (See Figure 1)
NOTE: Orient the Lifetime logo as shown.
Figure 1
Left Leg
2. Set the two holes in the cross support over the
two 47mm bolts and secure with locknuts. Do not
overtighten. (See Figure 2)
NOTE: Orient the Lifetime logo as shown.
Figure 2
3. Secure the cross support to the right leg with 47mm
bolts and locknuts. Do not overtighten. (See Figure 3)
Figure 3
Right
Leg
47mm Bolts
PAGE 2 OF 18
47mm
Bolts
Cross Support
Locknuts
47mm Bolts
Locknuts
ASSEMBLY
4. Set the seat down onto the legs as shown and align
the holes. (See Figure 4)
Figure 4
Holes
5. Secure the seat to the leg with 52mm bolts and
locknuts. Do not overtighten. (See Figure 5)
NOTE: Repeat this step for the other leg.
Figure 5
Locknuts
Seat
Hole
52mm Bolts
0721 IH-5947