11. Slide a handle onto the hinge. (See Figure 12)
Figure 12
12. Secure with two Allen bolts and nuts with the Allen
wrench. (See Figure 13)
NOTE: The nuts fit into the nut-shaped
indentations in the handle. (See Figure 13)
Figure 13
13. Repeat steps 7-12 for the other side of the hinge.
PAGE 4 OF 18
ASSEMBLY CONTINUED
Handle
Nuts
Allen Bolts
Nut-Shaped
Indentations
14. Set the hinge assembly onto the back of the legs
and align the holes. (See Figure 14)
Figure 14
Align Holes
15. Attach hinge assembly to the leg using two 54mm
bolts, four washers and two locknuts. (See Figure 15)
NOTE: Repeat for the other side.
Figure 15
54mm
Bolts
Locknuts
Washers
0721 IH-5947