Working Procedures; Assembly; Dust/Chip Extraction; Connecting A Dust Extraction Appliance - Parkside PMFW 310 D2 Traducción Del Manual De Instrucciones Original

Working procedures

Working principle
The oscillating drive causes the application tool to
move back and forth at speeds of up to 21000
times a minute. This allows for precision work even
in confined spaces.
Sawing/cutting
■ Use only undamaged saw blades that are in
perfect working order. Bent, blunt or otherwise
damaged saw blades may break.
■ When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers.
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process.
Sanding
■ To prolong the service life of the sanding sheets,
ensure that you apply even pressure.
│ GB │ MT
■ 42

Assembly

Dust/chip extraction

Materials containing asbestos may not be
processed. Asbestos is a known carcinogen.
WARNING! RISK OF FIRE!
■ When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e.g. when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the bag of the
vacuum cleaner can spontaneously ignite.
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time. Therefore,
avoid overheating of the material being
sanded as well as the appliance. Always
empty the vacuum cleaner's dust bag before
taking work breaks.
■ Use only approved vacuum cleaners, such as:
B. a workshop vacuum cleaner.
Wear a dust mask!
■ Always use dust extraction.
■ Ensure that your workplace is adequately
ventilated.
■ Observe the regulations applicable in your
country regarding the materials to be worked.
Connecting a dust extraction
appliance
♦ Push the extraction duct
connector together. Push the Adapter for
external extraction
Fix it in place by clicking the housing attach-
ment into the notch.
♦ Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the adapter for external vacuum
extraction .
and the ring
into the suction channel
PMFW 310 D2
.