Step 6 - Complete Installation; Control Panel; Buttons - Haier HPP08XCR Instrucciones De Instalación Y Manual Del Usuario

2. Holding the air conditioner with one hand, snap the
connector end of the hose into the air outlet on the back
of the air conditioner.

CONTROL PANEL

BUTTONS

A TIMER BUTTON
Program a time from (1-hour to 24-hours) for the air
conditioner to turn Off or On. When a Time Delay is
programmed, the Timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the
number of hours you want the air conditioner to
continue to operate before turning Off.
NOTE: Wait approximately 5 seconds for the
Turn-Off time to be saved.
While the air conditioner is off:
1. Press the Timer button.

STEP 6 - COMPLETE INSTALLATION

1.
2.
a b c d e
Timer High Low Water Full Cool
B FAN SPEED BUTTON
7
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
Plug the power cord into a grounded 3 prong outlet.
Press the Reset button on the power cord to ensure the
safety plug is providing power to the air conditioner.
f g
°C
Hr
°F
Fan Dehum Sleep POWER
2. Press the Up/Down arrow buttons to select the
number of hours you want the air conditioner to
remain off before turning On.
NOTE: Wait approximately 5 seconds for the
Turn-On time to be saved.
To cancel the timer:
•
Press the Timer button once, the hours remaining
will flash, press the timer button again and the timer
will be cancelled.
The fan speed can be adjusted from Low speed to High
speed when the air conditioner is in either Cool or Fan
mode.
NOTE: The fan speed cannot be adjusted when the
unit is in Dry mode.